These results are ranked by popularity.
| Error | |
|---|---|
| F0-48 | Description: Finisher saddle push motor section abnormality (FSM205) The pushing operation of the saddle unit is abnormal. |
| F1-08 | Description: Stapler shift trouble (FSM) |
| E7-14 | Description: CCD-ASIC error |
| U6-54 | Description: Option installation combination trouble Relay unit installation detection signal abnormality, front LCT installation detection signal abnormality, 2- series installation detection signal abnormality |
| UE-23 | Description: LCT2 warm air heater thermistor low temperature trouble The temperature does not reach the specified level within the specified time after turning ON the power relay. |
The most common error codes.
| Error | |
|---|---|
| F0-48 | Description: Finisher saddle push motor section abnormality (FSM205) The pushing operation of the saddle unit is abnormal. |
| F1-08 | Description: Stapler shift trouble (FSM) |
| E7-14 | Description: CCD-ASIC error |
| U6-54 | Description: Option installation combination trouble Relay unit installation detection signal abnormality, front LCT installation detection signal abnormality, 2- series installation detection signal abnormality |
| UE-23 | Description: LCT2 warm air heater thermistor low temperature trouble The temperature does not reach the specified level within the specified time after turning ON the power relay. |
| L4-03 | Description: Fusing motor lock trouble The motor lock signal is detected during rotation of the fusing motor. |
| PC-- | Description: Personal counter not detected |
| E7-96 | Description: MFPC PWB DIMM memory check error MFPC PWB DIMM memory access trouble |
| F0-48 | Description: Finisher saddle push motor section abnormality (FSM205) The pushing operation of the saddle unit is abnormal. |
| F1-08 | Description: Stapler shift trouble (FSM) |
