Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXM700U Top Searches

These results are ranked by popularity.

Error
L8-01Description: No full wave signal The full wave signal is not detected. When the FWS signal is not varied for 120ms when supplying the power.
EE-EUDescription: Auto developer adjustment trouble (Undertoner error) Described on the toner density control design specifications and the change request. When the average of 10 output values of the toner sensor (sampling data) after completion (3 min) of th
F2-46Description: Developing thermistor breakdown When the input value of the process thermistor is detected as 244 or greater or 20 or smaller for 3 times continuously
F7-01Description: FAX board EEPROM read/write error ACK from the EEPROM cannot be checked.
U5-31Description: DSPF tray lift-down trouble STLD does not turn off within the specified time.

Sharp MXM700U Common Errors

The most common error codes.

Error
L8-01Description: No full wave signal The full wave signal is not detected. When the FWS signal is not varied for 120ms when supplying the power.
EE-EUDescription: Auto developer adjustment trouble (Undertoner error) Described on the toner density control design specifications and the change request. When the average of 10 output values of the toner sensor (sampling data) after completion (3 min) of th
F2-46Description: Developing thermistor breakdown When the input value of the process thermistor is detected as 244 or greater or 20 or smaller for 3 times continuously
F7-01Description: FAX board EEPROM read/write error ACK from the EEPROM cannot be checked.
U5-31Description: DSPF tray lift-down trouble STLD does not turn off within the specified time.
EE-EUDescription: Auto developer adjustment trouble (Undertoner error) Described on the toner density control design specifications and the change request. When the average of 10 output values of the toner sensor (sampling data) after completion (3 min) of th
F2-46Description: Developing thermistor breakdown When the input value of the process thermistor is detected as 244 or greater or 20 or smaller for 3 times continuously
L8-01Description: No full wave signal The full wave signal is not detected. When the FWS signal is not varied for 120ms when supplying the power.
U5-31Description: DSPF tray lift-down trouble STLD does not turn off within the specified time.
E6-11Description: CIS shading trouble (White correction) When the power is turned on or when the proper gain setup value is not obtained with SIM 63-2 CIS shading (Retry number: 256 times): CIS white reference plate scan level is abnormal when the lamp is lig