Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXM620N Top Searches

These results are ranked by popularity.

Error
F1-62Description: Inserter/reverse sensor trouble Auto adjustment failure on turning on the power
E7-55Description: Incompatibility check (55ppm) (Engine (PCU) detection) An error is detected in the internal incompatibility check in the engine (PCU).
L1-00Description: Scanner feed trouble Scanner feed is not completed within the specified time. When MHP Soft is not detected within 2 sec after shifting the mirror base unit in the feeding direction.
U2-11Description: Counter check sum error (MFP control) EEPROM counter area checksum error. (If this error occurs, the process will retrieve for effective data within 8 blocks.)
F1-09Description: Finisher load capacity sensor trouble When the received data on performing the sensor test at turning on the power are outside the specified range. When the detected data on calculation of the correction value are outside the specified range

Sharp MXM620N Common Errors

The most common error codes.

Error
F1-62Description: Inserter/reverse sensor trouble Auto adjustment failure on turning on the power
E7-55Description: Incompatibility check (55ppm) (Engine (PCU) detection) An error is detected in the internal incompatibility check in the engine (PCU).
L1-00Description: Scanner feed trouble Scanner feed is not completed within the specified time. When MHP Soft is not detected within 2 sec after shifting the mirror base unit in the feeding direction.
U2-11Description: Counter check sum error (MFP control) EEPROM counter area checksum error. (If this error occurs, the process will retrieve for effective data within 8 blocks.)
F1-09Description: Finisher load capacity sensor trouble When the received data on performing the sensor test at turning on the power are outside the specified range. When the detected data on calculation of the correction value are outside the specified range
F1-62Description: Inserter/reverse sensor trouble Auto adjustment failure on turning on the power
E7-55Description: Incompatibility check (55ppm) (Engine (PCU) detection) An error is detected in the internal incompatibility check in the engine (PCU).
L1-00Description: Scanner feed trouble Scanner feed is not completed within the specified time. When MHP Soft is not detected within 2 sec after shifting the mirror base unit in the feeding direction.
U2-11Description: Counter check sum error (MFP control) EEPROM counter area checksum error. (If this error occurs, the process will retrieve for effective data within 8 blocks.)
F1-09Description: Finisher load capacity sensor trouble When the received data on performing the sensor test at turning on the power are outside the specified range. When the detected data on calculation of the correction value are outside the specified range