Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXM550 Top Searches

These results are ranked by popularity.

Error
H2-00Description: Thermistor open/Fusing unit not installed (HL1) Thermistor open (An input voltage of 4.6V or above is detected.) Fusing unit not installed
E6-14Description: CIS communication trouble When an error occurs in an access check to the CIS-ASIC on turning on the power or closing the DSFP cover. (Retry number: 5 times) Communication trouble between the scanner PWB and the CIS-ASIC. (Clock synchronizati
F2-31Description: Process control trouble (Photoconductor surface reflection rate abnormality) Before starting process control, the drum surface is read by the image density sensor to make the sensor gain adjustment so that the output is fixed to a certain le
L3-00Description: Scanner return trouble Scanner return is not completed within the specified time. MHPSon is not detected within 10sec after starting the mirror base unit in the return direction.
E7-56Description: Incompatibility check (62ppm) (Engine (PCU) detection) An error is detected in the internal incompatibility check in the engine (PCU).

Sharp MXM550 Common Errors

The most common error codes.

Error
H2-00Description: Thermistor open/Fusing unit not installed (HL1) Thermistor open (An input voltage of 4.6V or above is detected.) Fusing unit not installed
E6-14Description: CIS communication trouble When an error occurs in an access check to the CIS-ASIC on turning on the power or closing the DSFP cover. (Retry number: 5 times) Communication trouble between the scanner PWB and the CIS-ASIC. (Clock synchronizati
F2-31Description: Process control trouble (Photoconductor surface reflection rate abnormality) Before starting process control, the drum surface is read by the image density sensor to make the sensor gain adjustment so that the output is fixed to a certain le
L3-00Description: Scanner return trouble Scanner return is not completed within the specified time. MHPSon is not detected within 10sec after starting the mirror base unit in the return direction.
E7-56Description: Incompatibility check (62ppm) (Engine (PCU) detection) An error is detected in the internal incompatibility check in the engine (PCU).
H2-00Description: Thermistor open/Fusing unit not installed (HL1) Thermistor open (An input voltage of 4.6V or above is detected.) Fusing unit not installed
E6-14Description: CIS communication trouble When an error occurs in an access check to the CIS-ASIC on turning on the power or closing the DSFP cover. (Retry number: 5 times) Communication trouble between the scanner PWB and the CIS-ASIC. (Clock synchronizati
F2-31Description: Process control trouble (Photoconductor surface reflection rate abnormality) Before starting process control, the drum surface is read by the image density sensor to make the sensor gain adjustment so that the output is fixed to a certain le
L3-00Description: Scanner return trouble Scanner return is not completed within the specified time. MHPSon is not detected within 10sec after starting the mirror base unit in the return direction.
E7-56Description: Incompatibility check (62ppm) (Engine (PCU) detection) An error is detected in the internal incompatibility check in the engine (PCU).