These results are ranked by popularity.
| Error | |
|---|---|
| F1-10 | Description: Finisher stapler motor trouble Stapler motor operation abnormality |
| L8-01 | Description: No fullwave signal Full wave signal is not detected. |
| F1-80 | Description: Finisher power abnormality The 24V power is not supplied to the finisher PWB. |
| U2-80 | Description: EEPROM read/write error (Scanner) Scanner EEPROM write error |
| F2-22 | Description: Machine tray 2 lift-up trouble MCLUD does not turn ON in the specified time. |
The most common error codes.
| Error | |
|---|---|
| F1-10 | Description: Finisher stapler motor trouble Stapler motor operation abnormality |
| L8-01 | Description: No fullwave signal Full wave signal is not detected. |
| F1-80 | Description: Finisher power abnormality The 24V power is not supplied to the finisher PWB. |
| U2-80 | Description: EEPROM read/write error (Scanner) Scanner EEPROM write error |
| F2-22 | Description: Machine tray 2 lift-up trouble MCLUD does not turn ON in the specified time. |
| F1-10 | Description: Finisher stapler motor trouble Stapler motor operation abnormality |
| L8-01 | Description: No fullwave signal Full wave signal is not detected. |
| F1-80 | Description: Finisher power abnormality The 24V power is not supplied to the finisher PWB. |
| U2-80 | Description: EEPROM read/write error (Scanner) Scanner EEPROM write error |
| F2-22 | Description: Machine tray 2 lift-up trouble MCLUD does not turn ON in the specified time. |
