Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXM200D Top Searches

These results are ranked by popularity.

Error
F6-84Description: FAX board communication trouble (Framing) A framing error occurs in communication between the MCU and the FAX board.
E1-11Description: IMC ASIC error An abnormality occurs in the IMC PWB.
L4-01Description: Main motor lock detection The main motor does not rotate. The motor lock signal is detected for 1sec or more after rotation of the main motor. The motor lock signal is detected for 1sec during rotation of the main motor.
U9-82Description: Panel board communication trouble (Overrun) An overrun error occurs in communication between the MCU and the panel board.
E7-16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.

Sharp MXM200D Common Errors

The most common error codes.

Error
F6-84Description: FAX board communication trouble (Framing) A framing error occurs in communication between the MCU and the FAX board.
E1-11Description: IMC ASIC error An abnormality occurs in the IMC PWB.
L4-01Description: Main motor lock detection The main motor does not rotate. The motor lock signal is detected for 1sec or more after rotation of the main motor. The motor lock signal is detected for 1sec during rotation of the main motor.
U9-82Description: Panel board communication trouble (Overrun) An overrun error occurs in communication between the MCU and the panel board.
E7-16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
F6-84Description: FAX board communication trouble (Framing) A framing error occurs in communication between the MCU and the FAX board.
E1-11Description: IMC ASIC error An abnormality occurs in the IMC PWB.
L4-01Description: Main motor lock detection The main motor does not rotate. The motor lock signal is detected for 1sec or more after rotation of the main motor. The motor lock signal is detected for 1sec during rotation of the main motor.
U9-82Description: Panel board communication trouble (Overrun) An overrun error occurs in communication between the MCU and the panel board.
E7-16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.