Sharp MXM1100 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXM1100 Top Searches

These results are ranked by popularity.

Error
L4-15Description: Fusing front PG control error. FPGHP is not changed over during the initializing operation of the fusing front PG motor
F6-21Description: Combination error of the TEL / LIU PWB and the FAX soft switch
F1-74Description: Pressure sensor adjustment abnormality. The sensor input value does not become the proper level in the automatic adjustment of the pressure sensor.
U7-50Description: Serial vendor communication trouble. Communication error between the ICU and the serial vendor Section ICU
F1-17Description: Staple select motor trouble. Finisher staple transport path select motor abnormality

Sharp MXM1100 Common Errors

The most common error codes.

Error
L4-15Description: Fusing front PG control error. FPGHP is not changed over during the initializing operation of the fusing front PG motor
F6-21Description: Combination error of the TEL / LIU PWB and the FAX soft switch
F1-74Description: Pressure sensor adjustment abnormality. The sensor input value does not become the proper level in the automatic adjustment of the pressure sensor.
U7-50Description: Serial vendor communication trouble. Communication error between the ICU and the serial vendor Section ICU
F1-17Description: Staple select motor trouble. Finisher staple transport path select motor abnormality
L4-15Description: Fusing front PG control error. FPGHP is not changed over during the initializing operation of the fusing front PG motor
F6-21Description: Combination error of the TEL / LIU PWB and the FAX soft switch
F1-74Description: Pressure sensor adjustment abnormality. The sensor input value does not become the proper level in the automatic adjustment of the pressure sensor.
U7-50Description: Serial vendor communication trouble. Communication error between the ICU and the serial vendor Section ICU
F1-17Description: Staple select motor trouble. Finisher staple transport path select motor abnormality