Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXB201 Top Searches

These results are ranked by popularity.

Error
F6 60Description: AFAX plug detect error. For USB connection with AFAX, ANB cannot detect the connection with AFAX.
L6 10Description: Polygon motor lock detection. The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation.
E7 01Description: Image data error. 1) The memory capacity for the duplex model machine is improper. Insufficient memory capacity 2) Duplex setting for the single-surface model.
F6 90Description: AFAX USB communicate error. For interface, ANB cannot be communicated with AFAX.
U1 03Description: Network board battery error. The RTC backup battery voltage on network PWB falls.

Sharp MXB201 Common Errors

The most common error codes.

Error
F6 60Description: AFAX plug detect error. For USB connection with AFAX, ANB cannot detect the connection with AFAX.
L6 10Description: Polygon motor lock detection. The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation.
E7 01Description: Image data error. 1) The memory capacity for the duplex model machine is improper. Insufficient memory capacity 2) Duplex setting for the single-surface model.
F6 90Description: AFAX USB communicate error. For interface, ANB cannot be communicated with AFAX.
U1 03Description: Network board battery error. The RTC backup battery voltage on network PWB falls.
F6 60Description: AFAX plug detect error. For USB connection with AFAX, ANB cannot detect the connection with AFAX.
L6 10Description: Polygon motor lock detection. The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation.
E7 01Description: Image data error. 1) The memory capacity for the duplex model machine is improper. Insufficient memory capacity 2) Duplex setting for the single-surface model.
F6 90Description: AFAX USB communicate error. For interface, ANB cannot be communicated with AFAX.
U1 03Description: Network board battery error. The RTC backup battery voltage on network PWB falls.