These results are ranked by popularity.
Error | |
---|---|
UE-23 | Description: LCT2 warm air heater thermistor low temperature trouble. The temperature does not reach the specified level within the specified time after turning ON the power relay. |
C1-10 | Description: Main charger trouble (Monochrome) |
U6-09 | Description: LCC lift motor trouble. No variation in the motor rotation sensor signal (encoder sign) is detected within the specified time after booting or stopping the LCC lift motor. |
L4-49 | Description: ADU transport cooling fan motor R trouble. The lock signal is detected during rotation of the ADU transport cooling fan motor R. |
U6-73 | Description: LCT4 reverse winding detection trouble. It is detected that the wire of the tray is reversely wound. |
The most common error codes.
Error | |
---|---|
UE-23 | Description: LCT2 warm air heater thermistor low temperature trouble. The temperature does not reach the specified level within the specified time after turning ON the power relay. |
C1-10 | Description: Main charger trouble (Monochrome) |
U6-09 | Description: LCC lift motor trouble. No variation in the motor rotation sensor signal (encoder sign) is detected within the specified time after booting or stopping the LCC lift motor. |
L4-49 | Description: ADU transport cooling fan motor R trouble. The lock signal is detected during rotation of the ADU transport cooling fan motor R. |
U6-73 | Description: LCT4 reverse winding detection trouble. It is detected that the wire of the tray is reversely wound. |
UE-23 | Description: LCT2 warm air heater thermistor low temperature trouble. The temperature does not reach the specified level within the specified time after turning ON the power relay. |
C1-10 | Description: Main charger trouble (Monochrome) |
U6-09 | Description: LCC lift motor trouble. No variation in the motor rotation sensor signal (encoder sign) is detected within the specified time after booting or stopping the LCC lift motor. |
L4-49 | Description: ADU transport cooling fan motor R trouble. The lock signal is detected during rotation of the ADU transport cooling fan motor R. |
U6-73 | Description: LCT4 reverse winding detection trouble. It is detected that the wire of the tray is reversely wound. |