Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MX7580N Top Searches

These results are ranked by popularity.

Error
L4-17Description: Drum motor lock trouble (K). The motor lock signal is detected during rotation of the drum motor (K).
U7-50Description: MFPC PWB - Vendor machine communication error. Communication error between the MFP and the serial vendor.
F2-24Description: Discharge lamp trouble (M) When the discharge lamp open sensor is kept ON for a certain time from turning ON the discharge lamp, it is detected as a trouble.
C4-21Description: 1st transfer output short trouble
F6-01Description: FAX control PWB EEPROM read/write error. FAX control PWB EEPROM access error (Read and write)

Sharp MX7580N Common Errors

The most common error codes.

Error
L4-17Description: Drum motor lock trouble (K). The motor lock signal is detected during rotation of the drum motor (K).
U7-50Description: MFPC PWB - Vendor machine communication error. Communication error between the MFP and the serial vendor.
F2-24Description: Discharge lamp trouble (M) When the discharge lamp open sensor is kept ON for a certain time from turning ON the discharge lamp, it is detected as a trouble.
C4-21Description: 1st transfer output short trouble
F6-01Description: FAX control PWB EEPROM read/write error. FAX control PWB EEPROM access error (Read and write)
L4-17Description: Drum motor lock trouble (K). The motor lock signal is detected during rotation of the drum motor (K).
U7-50Description: MFPC PWB - Vendor machine communication error. Communication error between the MFP and the serial vendor.
F2-24Description: Discharge lamp trouble (M) When the discharge lamp open sensor is kept ON for a certain time from turning ON the discharge lamp, it is detected as a trouble.
C4-21Description: 1st transfer output short trouble
F6-01Description: FAX control PWB EEPROM read/write error. FAX control PWB EEPROM access error (Read and write)