Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MX7090 Top Searches

These results are ranked by popularity.

Error
U6-21Description: LCC transport motor trouble.
F0-86Description: Finisher discharged paper hold motor section abnormality (FNM114). The operation of the paper hold lever at the paper exit port of the finisher is abnormal.
E7-90Description: MFP - PCU PWB communication error
H4-00Description: Fusing section low temperature trouble (TH_UM_AD2). The fusing temperature does not reach the specified level within the specified time from turning ON the power relay.
F0-40Description: Communication trouble between the finisher saddle and the trimmer. Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit.

Sharp MX7090 Common Errors

The most common error codes.

Error
U6-21Description: LCC transport motor trouble.
F0-86Description: Finisher discharged paper hold motor section abnormality (FNM114). The operation of the paper hold lever at the paper exit port of the finisher is abnormal.
E7-90Description: MFP - PCU PWB communication error
H4-00Description: Fusing section low temperature trouble (TH_UM_AD2). The fusing temperature does not reach the specified level within the specified time from turning ON the power relay.
F0-40Description: Communication trouble between the finisher saddle and the trimmer. Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit.
L4-49Description: ADU transport cooling fan motor R trouble. The lock signal is detected during rotation of the ADU transport cooling fan motor R.
F0-40Description: Communication trouble between the finisher saddle and the trimmer. Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit.
F0-86Description: Finisher discharged paper hold motor section abnormality (FNM114). The operation of the paper hold lever at the paper exit port of the finisher is abnormal.
F2-58Description: Temperature/humidity sensor trouble (HUD_M/TH_M)
C4-21Description: Primary transfer output short trouble. When the primary transfer output is delivered, the output voltage does not reach the specified level.