Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MX4501N Top Searches

These results are ranked by popularity.

Error
H3-01Description: Fusing section high temperature trouble (TH_LM) The fusing temperature inside the PWB exceeds the specified level.
U2-81Description: Adjustment value check sum error (SCU detection) EEPROM (SCU) check sum error
F2-50Description: K phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the BK drum phase. The detection signal cannot be acquired and phase control cannot be ma
E7-70Description: Scanner connection trouble Unknown identification information is detected in the SCU PWB.
F1-20Description: Finisher after-alignment motor abnormality After-alignment motor trouble

Sharp MX4501N Common Errors

The most common error codes.

Error
H3-01Description: Fusing section high temperature trouble (TH_LM) The fusing temperature inside the PWB exceeds the specified level.
U2-81Description: Adjustment value check sum error (SCU detection) EEPROM (SCU) check sum error
F2-50Description: K phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the BK drum phase. The detection signal cannot be acquired and phase control cannot be ma
E7-70Description: Scanner connection trouble Unknown identification information is detected in the SCU PWB.
F1-20Description: Finisher after-alignment motor abnormality After-alignment motor trouble
H3-01Description: Fusing section high temperature trouble (TH_LM) The fusing temperature inside the PWB exceeds the specified level.
U2-81Description: Adjustment value check sum error (SCU detection) EEPROM (SCU) check sum error
F2-50Description: K phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the BK drum phase. The detection signal cannot be acquired and phase control cannot be ma
E7-70Description: Scanner connection trouble Unknown identification information is detected in the SCU PWB.
F1-20Description: Finisher after-alignment motor abnormality After-alignment motor trouble