Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MX4500FN Top Searches

These results are ranked by popularity.

Error
U2-05Description: HDD/Flash/EEPROM data discrepancy A HDD or Flash memory for user authentication different from that used before turn off the power is installed.
F2-94Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t
E7-20Description: LSU BD detection trouble LSU BD signal is not detected.
F1-40Description: Saddle finisher punch power interruption trouble (MX-FNX2) When the punch unit power interruption is detected.
U2-90Description: EEPROM read/write error (PCU detection) EEPROM version error, write error to EEPROM

Sharp MX4500FN Common Errors

The most common error codes.

Error
U2-05Description: HDD/Flash/EEPROM data discrepancy A HDD or Flash memory for user authentication different from that used before turn off the power is installed.
F2-94Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t
E7-20Description: LSU BD detection trouble LSU BD signal is not detected.
F1-40Description: Saddle finisher punch power interruption trouble (MX-FNX2) When the punch unit power interruption is detected.
U2-90Description: EEPROM read/write error (PCU detection) EEPROM version error, write error to EEPROM
F1-40Description: Saddle finisher punch power interruption trouble (MX-FNX2) When the punch unit power interruption is detected.
E7-20Description: LSU BD detection trouble LSU BD signal is not detected.
F2-94Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t
U2-05Description: HDD/Flash/EEPROM data discrepancy A HDD or Flash memory for user authentication different from that used before turn off the power is installed.
F2-51Description: CL phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the phases of all the color drums. The detection signal cannot be acquired and phase con