Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MX3501FN Top Searches

These results are ranked by popularity.

Error
F2-94Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t
F1-40Description: Saddle finisher punch power interruption trouble (MX-FNX2) When the punch unit power interruption is detected.
U2-05Description: HDD/Flash/EEPROM data discrepancy A HDD or Flash memory for user authentication different from that used before turn off the power is installed.
E7-20Description: LSU BD detection trouble LSU BD signal is not detected.
F2-51Description: CL phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the phases of all the color drums. The detection signal cannot be acquired and phase con

Sharp MX3501FN Common Errors

The most common error codes.

Error
F2-94Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t
F1-40Description: Saddle finisher punch power interruption trouble (MX-FNX2) When the punch unit power interruption is detected.
U2-05Description: HDD/Flash/EEPROM data discrepancy A HDD or Flash memory for user authentication different from that used before turn off the power is installed.
E7-20Description: LSU BD detection trouble LSU BD signal is not detected.
F2-51Description: CL phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the phases of all the color drums. The detection signal cannot be acquired and phase con
F2-94Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t
F1-40Description: Saddle finisher punch power interruption trouble (MX-FNX2) When the punch unit power interruption is detected.
U2-05Description: HDD/Flash/EEPROM data discrepancy A HDD or Flash memory for user authentication different from that used before turn off the power is installed.
E7-20Description: LSU BD detection trouble LSU BD signal is not detected.
F2-51Description: CL phase sensor sensing trouble Detection is made by interruption of light in the sensor section of the projection rib on the drum drive gear to control the phases of all the color drums. The detection signal cannot be acquired and phase con