Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MX3110FN Top Searches

These results are ranked by popularity.

Error
H4-02Description: Fusing section low temperature trouble (TH_US) The fusing temperature does not reach the specified level within the specified time from turning ON the power relay.
F1-03Description: Finisher paper exit roller lifting operation trouble
L4-50Description: Process fan trouble The fan operation signal is not detected.
F1-50Description: Main unit - Finisher combination error
A0-15Description: Incompatible DSK BOOT and program firmware

Sharp MX3110FN Common Errors

The most common error codes.

Error
H4-02Description: Fusing section low temperature trouble (TH_US) The fusing temperature does not reach the specified level within the specified time from turning ON the power relay.
F1-03Description: Finisher paper exit roller lifting operation trouble
L4-50Description: Process fan trouble The fan operation signal is not detected.
F1-50Description: Main unit - Finisher combination error
A0-15Description: Incompatible DSK BOOT and program firmware
H4-02Description: Fusing section low temperature trouble (TH_US) The fusing temperature does not reach the specified level within the specified time from turning ON the power relay.
F1-03Description: Finisher paper exit roller lifting operation trouble
L4-50Description: Process fan trouble The fan operation signal is not detected.
F1-50Description: Main unit - Finisher combination error
A0-15Description: Incompatible DSK BOOT and program firmware