These results are ranked by popularity.
Error | |
---|---|
E7-11 | Description: Shading trouble (White correction) CCD white scan level abnormality when the copy lamp is on. |
F1-02 | Description: Saddle finisher transport motor trouble Transport drive motor trouble |
F2-94 | Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t |
L4-06 | Description: Transfer belt separation position sensor trouble When separating the primary transfer belt unit, change in the separation position sensor characteristics is not detected within the specified time. |
U6-02 | Description: Tray 2 lift-up trouble DLUD2 does not turn ON within the specified time. |
The most common error codes.
Error | |
---|---|
E7-11 | Description: Shading trouble (White correction) CCD white scan level abnormality when the copy lamp is on. |
F1-02 | Description: Saddle finisher transport motor trouble Transport drive motor trouble |
F2-94 | Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t |
L4-06 | Description: Transfer belt separation position sensor trouble When separating the primary transfer belt unit, change in the separation position sensor characteristics is not detected within the specified time. |
U6-02 | Description: Tray 2 lift-up trouble DLUD2 does not turn ON within the specified time. |
E7-11 | Description: Shading trouble (White correction) CCD white scan level abnormality when the copy lamp is on. |
F1-02 | Description: Saddle finisher transport motor trouble Transport drive motor trouble |
F2-94 | Description: High-density process control density correction error (YELLOW) The patch density value is not in the range of the density correction reference density value (STD value) ±30% at the upper limit or the lower limit bias voltage when executing t |
L4-06 | Description: Transfer belt separation position sensor trouble When separating the primary transfer belt unit, change in the separation position sensor characteristics is not detected within the specified time. |
U6-02 | Description: Tray 2 lift-up trouble DLUD2 does not turn ON within the specified time. |