Sharp FODC550 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp FODC550 Top Searches

These results are ranked by popularity.

Error
H4-00Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
10Description: IMC trouble An abnormality occurs in the IMC.
16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
L1-00Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg
10Description: IMC trouble An abnormality occurs in the IMC.

Sharp FODC550 Common Errors

The most common error codes.

Error
H4-00Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
10Description: IMC trouble An abnormality occurs in the IMC.
16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
L1-00Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg
10Description: IMC trouble An abnormality occurs in the IMC.
H4-00Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
10Description: IMC trouble An abnormality occurs in the IMC.
16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
L1-00Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg
10Description: IMC trouble An abnormality occurs in the IMC.