These results are ranked by popularity.
| Error | |
|---|---|
| F1 15 | Description: Finisher lift-up motor trouble. The finisher lift-up motor does not reach the specified position. |
| U2 40 | Description: Error in MCU-CRUM chip communication |
| E1 13 | Description: IMC board flash ROM error. Flash ROM abnormality on IMC board |
| F9 81 | Description: Communication trouble between MCU and printer PWB (Parity error) |
| E7 10 | Description: Shading trouble (black correction). CCD black reference plate scan level abnormality when the copy lamp turns off. |
The most common error codes.
| Error | |
|---|---|
| F1 15 | Description: Finisher lift-up motor trouble. The finisher lift-up motor does not reach the specified position. |
| U2 40 | Description: Error in MCU-CRUM chip communication |
| E1 13 | Description: IMC board flash ROM error. Flash ROM abnormality on IMC board |
| F9 81 | Description: Communication trouble between MCU and printer PWB (Parity error) |
| E7 10 | Description: Shading trouble (black correction). CCD black reference plate scan level abnormality when the copy lamp turns off. |
| F1 15 | Description: Finisher lift-up motor trouble. The finisher lift-up motor does not reach the specified position. |
| U2 40 | Description: Error in MCU-CRUM chip communication |
| E1 13 | Description: IMC board flash ROM error. Flash ROM abnormality on IMC board |
| F9 81 | Description: Communication trouble between MCU and printer PWB (Parity error) |
| E7 10 | Description: Shading trouble (black correction). CCD black reference plate scan level abnormality when the copy lamp turns off. |
