Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp ARN182G Top Searches

These results are ranked by popularity.

Error
F6-88Description: FAX board communication trouble (Time out).FAX board communication error.
L8-01Description: No full wave signal.The zero cross signal is not detected.
CH-BlinkDescription: Developing cartridge not installedThe developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
F2-64Description: Toner supply abnormality When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%.
H3-00Description: Heat roller high temperature detection (MAIN)The fusing temperature exceeds 245C°.

Sharp ARN182G Common Errors

The most common error codes.

Error
F6-88Description: FAX board communication trouble (Time out).FAX board communication error.
L8-01Description: No full wave signal.The zero cross signal is not detected.
CH-BlinkDescription: Developing cartridge not installedThe developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
F2-64Description: Toner supply abnormality When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%.
H3-00Description: Heat roller high temperature detection (MAIN)The fusing temperature exceeds 245C°.
F6-88Description: FAX board communication trouble (Time out).FAX board communication error.
L8-01Description: No full wave signal.The zero cross signal is not detected.
CH-BlinkDescription: Developing cartridge not installedThe developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
F2-64Description: Toner supply abnormality When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%.
H3-00Description: Heat roller high temperature detection (MAIN)The fusing temperature exceeds 245C°.