These results are ranked by popularity.
| Error | |
|---|---|
| F1-02 | Description: Finisher transport motor abnormality Transport motor drive trouble |
| PF-00 | Description: RIC copy inhibit signal is received. Copy inhibit command from RIM (host) is received. |
| F1-39 | Description: Console finisher punch dust sensor trouble Punch dust sensor detection trouble |
| E6-11 | Description: CSI shading trouble (White correction) The CIS white reference plate scan level is abnormal when the lamp is on. |
| F3-22 | Description: Machine tray 2 lift-up trouble MCLUD does not turn ON in the specified time. |
The most common error codes.
| Error | |
|---|---|
| F1-02 | Description: Finisher transport motor abnormality Transport motor drive trouble |
| PF-00 | Description: RIC copy inhibit signal is received. Copy inhibit command from RIM (host) is received. |
| F1-39 | Description: Console finisher punch dust sensor trouble Punch dust sensor detection trouble |
| E6-11 | Description: CSI shading trouble (White correction) The CIS white reference plate scan level is abnormal when the lamp is on. |
| F3-22 | Description: Machine tray 2 lift-up trouble MCLUD does not turn ON in the specified time. |
| F1-02 | Description: Finisher transport motor abnormality Transport motor drive trouble |
| PF-00 | Description: RIC copy inhibit signal is received. Copy inhibit command from RIM (host) is received. |
| F1-39 | Description: Console finisher punch dust sensor trouble Punch dust sensor detection trouble |
| E6-11 | Description: CSI shading trouble (White correction) The CIS white reference plate scan level is abnormal when the lamp is on. |
| F3-22 | Description: Machine tray 2 lift-up trouble MCLUD does not turn ON in the specified time. |
