Sharp ARM351 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp ARM351 Top Searches

These results are ranked by popularity.

Error
U7-00Description: RIC communication trouble RIC communication trouble Communication cable test error after turning on the power or exiting SIM.
F6-98Description: Combination error of the FAX-BOX destination information and the machine destination information Combination error of the FAX-BOX destination information and the machine destination information
F1-20Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality
EUDescription: Auto developer adjustment trouble (Under-toner) The toner concentration output is detected as 3.5V or above in the auto development adjustment.
L6-10Description: Polygon motor lock detection It is judged that the polygon motor lock signal is not outputted. Lock signal is checked in the interval of 10sec after starting the polygon motor, and it is judged that the polygon motor does not rotate normally

Sharp ARM351 Common Errors

The most common error codes.

Error
U7-00Description: RIC communication trouble RIC communication trouble Communication cable test error after turning on the power or exiting SIM.
F6-98Description: Combination error of the FAX-BOX destination information and the machine destination information Combination error of the FAX-BOX destination information and the machine destination information
F1-20Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality
EUDescription: Auto developer adjustment trouble (Under-toner) The toner concentration output is detected as 3.5V or above in the auto development adjustment.
L6-10Description: Polygon motor lock detection It is judged that the polygon motor lock signal is not outputted. Lock signal is checked in the interval of 10sec after starting the polygon motor, and it is judged that the polygon motor does not rotate normally
U7-00Description: RIC communication trouble RIC communication trouble Communication cable test error after turning on the power or exiting SIM.
F6-98Description: Combination error of the FAX-BOX destination information and the machine destination information Combination error of the FAX-BOX destination information and the machine destination information
F1-20Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality
EUDescription: Auto developer adjustment trouble (Under-toner) The toner concentration output is detected as 3.5V or above in the auto development adjustment.
L6-10Description: Polygon motor lock detection It is judged that the polygon motor lock signal is not outputted. Lock signal is checked in the interval of 10sec after starting the polygon motor, and it is judged that the polygon motor does not rotate normally