Sharp ARM201 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp ARM201 Top Searches

These results are ranked by popularity.

Error
E7-16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
L4-32Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the lo
E1-00Description: IMC PWB communication trouble An abnormality occurs in communication between the MCU PWB and the IMC PWB.
F2-02Description: Toner supply abnormality The maximum toner supply time is greatly exceeded.
L6-10Description: Polygon motor lock detection The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for 1sec during rotation of the polygon motor.

Sharp ARM201 Common Errors

The most common error codes.

Error
E7-16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
L4-32Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the lo
E1-00Description: IMC PWB communication trouble An abnormality occurs in communication between the MCU PWB and the IMC PWB.
F2-02Description: Toner supply abnormality The maximum toner supply time is greatly exceeded.
L6-10Description: Polygon motor lock detection The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for 1sec during rotation of the polygon motor.
E7-16Description: Abnormal laser output When the laser output is stopped, HSYNC is detected.
L4-32Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the lo
E1-00Description: IMC PWB communication trouble An abnormality occurs in communication between the MCU PWB and the IMC PWB.
F2-02Description: Toner supply abnormality The maximum toner supply time is greatly exceeded.
L6-10Description: Polygon motor lock detection The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for 1sec during rotation of the polygon motor.