These results are ranked by popularity.
| Error | |
|---|---|
| L3 00 | Description: The mirror home position (MHPS) does not turn on though the mirror base returning is completed during mirror initial operation after turning on the power. The mirror home position does not turn on when the mirror is returned to the home posi |
| E11 14 | Description: E-Sort PWB Work RAM abnormality |
| U9 00 | Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error |
| F6 82 | Description: Communication trouble between MCU and FAX control PWB (Overrun error) |
| L4 01 | Description: Main motor lock. The main motor encoder pulse is not detected for 400msec. |
The most common error codes.
| Error | |
|---|---|
| L3 00 | Description: The mirror home position (MHPS) does not turn on though the mirror base returning is completed during mirror initial operation after turning on the power. The mirror home position does not turn on when the mirror is returned to the home posi |
| E11 14 | Description: E-Sort PWB Work RAM abnormality |
| U9 00 | Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error |
| F6 82 | Description: Communication trouble between MCU and FAX control PWB (Overrun error) |
| L4 01 | Description: Main motor lock. The main motor encoder pulse is not detected for 400msec. |
| L3 00 | Description: The mirror home position (MHPS) does not turn on though the mirror base returning is completed during mirror initial operation after turning on the power. The mirror home position does not turn on when the mirror is returned to the home posi |
| E11 14 | Description: E-Sort PWB Work RAM abnormality |
| U9 00 | Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error |
| F6 82 | Description: Communication trouble between MCU and FAX control PWB (Overrun error) |
| L4 01 | Description: Main motor lock. The main motor encoder pulse is not detected for 400msec. |
