Sharp AR5516N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR5516N Top Searches

These results are ranked by popularity.

Error
F2 40Description: ATC sensor value abnormality
L6 10Description: Polygon motor lock detection. The polygon motor does not rotate After shifting the polygon motor, the motor lock signal is detected for 20sec or more. During rotation of the polygon motor, the motor lock signal is detected for 1sec.
CH BlinkDescription: Developing cartridge not installed. The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
F5 02Description: Copy lamp lighting abnormality. The copy lamp does not turn on.
U2 04Description: EEPROM read/write error (Serial communication error)

Sharp AR5516N Common Errors

The most common error codes.

Error
F2 40Description: ATC sensor value abnormality
L6 10Description: Polygon motor lock detection. The polygon motor does not rotate After shifting the polygon motor, the motor lock signal is detected for 20sec or more. During rotation of the polygon motor, the motor lock signal is detected for 1sec.
CH BlinkDescription: Developing cartridge not installed. The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
F5 02Description: Copy lamp lighting abnormality. The copy lamp does not turn on.
U2 04Description: EEPROM read/write error (Serial communication error)
F2 40Description: ATC sensor value abnormality
L6 10Description: Polygon motor lock detection. The polygon motor does not rotate After shifting the polygon motor, the motor lock signal is detected for 20sec or more. During rotation of the polygon motor, the motor lock signal is detected for 1sec.
CH BlinkDescription: Developing cartridge not installed. The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
F5 02Description: Copy lamp lighting abnormality. The copy lamp does not turn on.
U2 04Description: EEPROM read/write error (Serial communication error)