These results are ranked by popularity.
Error | |
---|---|
F2 02 | Description: Toner supply abnormality Detail When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%. |
L4 31 | Description: Fusing fan lock detection. The fusing fan does not rotate. Sampling is performed in 50msec interval, and the normal signal cannot be detected 5 times continuously in 1 sec. |
F2 04 | Description: •Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark |
L4 32 | Description: PSFAN lock detection. The PSFAN does not rotate. Sampling is performed in 50msec interval, and the normal signal cannot be detected 5 times continuously in 1 sec. |
F2 40 | Description: ATC sensor value abnormality |
The most common error codes.
Error | |
---|---|
F2 02 | Description: Toner supply abnormality Detail When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%. |
L4 31 | Description: Fusing fan lock detection. The fusing fan does not rotate. Sampling is performed in 50msec interval, and the normal signal cannot be detected 5 times continuously in 1 sec. |
F2 04 | Description: •Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark |
L4 32 | Description: PSFAN lock detection. The PSFAN does not rotate. Sampling is performed in 50msec interval, and the normal signal cannot be detected 5 times continuously in 1 sec. |
F2 40 | Description: ATC sensor value abnormality |
F2 02 | Description: Toner supply abnormality Detail When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%. |
L4 31 | Description: Fusing fan lock detection. The fusing fan does not rotate. Sampling is performed in 50msec interval, and the normal signal cannot be detected 5 times continuously in 1 sec. |
F2 04 | Description: •Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark |
L4 32 | Description: PSFAN lock detection. The PSFAN does not rotate. Sampling is performed in 50msec interval, and the normal signal cannot be detected 5 times continuously in 1 sec. |
F2 40 | Description: ATC sensor value abnormality |