These results are ranked by popularity.
| Error | |
|---|---|
| E1-10 | Description: IMC PWB trouble An abnormality occurs in the IMC PWB. |
| E7-12 | Description: Shading trouble White correction is not completed in the specified number of operations. |
| L6-10 | Description: Polygon motor lock detection The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for 1sec during rotation of the polygon motor. |
| E1-11 | Description: IMC ASIC error An abnormality occurs in the IMC PWB. |
| E7-16 | Description: Abnormal laser output When the laser output is stopped, HSYNC is detected. |
The most common error codes.
| Error | |
|---|---|
| E1-10 | Description: IMC PWB trouble An abnormality occurs in the IMC PWB. |
| E7-12 | Description: Shading trouble White correction is not completed in the specified number of operations. |
| L6-10 | Description: Polygon motor lock detection The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for 1sec during rotation of the polygon motor. |
| E1-11 | Description: IMC ASIC error An abnormality occurs in the IMC PWB. |
| E7-16 | Description: Abnormal laser output When the laser output is stopped, HSYNC is detected. |
| E1-10 | Description: IMC PWB trouble An abnormality occurs in the IMC PWB. |
| E7-12 | Description: Shading trouble White correction is not completed in the specified number of operations. |
| L6-10 | Description: Polygon motor lock detection The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for 1sec during rotation of the polygon motor. |
| E1-11 | Description: IMC ASIC error An abnormality occurs in the IMC PWB. |
| E7-16 | Description: Abnormal laser output When the laser output is stopped, HSYNC is detected. |
