Sharp AR5015N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR5015N Top Searches

These results are ranked by popularity.

Error
H4 00Description: Heat roller abnormally low temperature. When the temperature does not reach 155°C within 55 sec after turning on the power, or when it falls under 145°C during printing, or when it falls under 100°C during pre-heating.
U9 00Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error
E11 12Description: E-Sort PWB CODEC error
F6 80Description: Communication trouble between MCU and FAX control PWB (Protocol error)
L1 00Description: Mirror base feed trouble. The mirror home position (MHPS) does not turn off though the feed operation is completed during mirror initial operation after turning on the power. The mirror home position (MHPS) does not turn off during shading o

Sharp AR5015N Common Errors

The most common error codes.

Error
H4 00Description: Heat roller abnormally low temperature. When the temperature does not reach 155°C within 55 sec after turning on the power, or when it falls under 145°C during printing, or when it falls under 100°C during pre-heating.
U9 00Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error
E11 12Description: E-Sort PWB CODEC error
F6 80Description: Communication trouble between MCU and FAX control PWB (Protocol error)
L1 00Description: Mirror base feed trouble. The mirror home position (MHPS) does not turn off though the feed operation is completed during mirror initial operation after turning on the power. The mirror home position (MHPS) does not turn off during shading o
H4 00Description: Heat roller abnormally low temperature. When the temperature does not reach 155°C within 55 sec after turning on the power, or when it falls under 145°C during printing, or when it falls under 100°C during pre-heating.
U9 00Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error
E11 12Description: E-Sort PWB CODEC error
F6 80Description: Communication trouble between MCU and FAX control PWB (Protocol error)
L1 00Description: Mirror base feed trouble. The mirror home position (MHPS) does not turn off though the feed operation is completed during mirror initial operation after turning on the power. The mirror home position (MHPS) does not turn off during shading o