Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR451S Top Searches

These results are ranked by popularity.

Error
H4Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the
F1-20Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality
E7-60Description: Controller skating trouble Occurrence of an error in controller skating check
F1-80Description: Mail-bin stacker power abnormality The 24V power is not supplied to the Mail-bin stacker PWB.
U2-12Description: Adjustment value check sum error (ICU) Adjustment data area check sum error

Sharp AR451S Common Errors

The most common error codes.

Error
H4Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the
F1-20Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality
E7-60Description: Controller skating trouble Occurrence of an error in controller skating check
F1-80Description: Mail-bin stacker power abnormality The 24V power is not supplied to the Mail-bin stacker PWB.
U2-12Description: Adjustment value check sum error (ICU) Adjustment data area check sum error
H4Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the
F1-20Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality
E7-60Description: Controller skating trouble Occurrence of an error in controller skating check
F1-80Description: Mail-bin stacker power abnormality The 24V power is not supplied to the Mail-bin stacker PWB.
U2-12Description: Adjustment value check sum error (ICU) Adjustment data area check sum error