These results are ranked by popularity.
| Error | |
|---|---|
| E7-60 | Description: Controller skating trouble Occurrence of an error in controller skating check |
| H4 | Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the |
| F1-20 | Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality |
| U2-12 | Description: Adjustment value check sum error (ICU) Adjustment data area check sum error |
| C1-00 | Description: MC trouble Main charger output abnormality (Output open) Trouble signal is outputted from the high voltage transformer. |
The most common error codes.
| Error | |
|---|---|
| E7-60 | Description: Controller skating trouble Occurrence of an error in controller skating check |
| H4 | Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the |
| F1-20 | Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality |
| U2-12 | Description: Adjustment value check sum error (ICU) Adjustment data area check sum error |
| C1-00 | Description: MC trouble Main charger output abnormality (Output open) Trouble signal is outputted from the high voltage transformer. |
| E7-60 | Description: Controller skating trouble Occurrence of an error in controller skating check |
| H4 | Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the |
| F1-20 | Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality |
| U2-12 | Description: Adjustment value check sum error (ICU) Adjustment data area check sum error |
| C1-00 | Description: MC trouble Main charger output abnormality (Output open) Trouble signal is outputted from the high voltage transformer. |
