These results are ranked by popularity.
| Error | |
|---|---|
| E7-60 | Description: Controller skating trouble Occurrence of an error in controller skating check |
| F1-20 | Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality |
| H4 | Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the |
| F1-02 | Description: Mail-bin stacker transport motor abnormality Transport motor trouble |
| F1-40 | Description: Console finisher punch power interruption trouble When power interruption of the punch unit is detected |
The most common error codes.
| Error | |
|---|---|
| E7-60 | Description: Controller skating trouble Occurrence of an error in controller skating check |
| F1-20 | Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality |
| H4 | Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the |
| F1-02 | Description: Mail-bin stacker transport motor abnormality Transport motor trouble |
| F1-40 | Description: Console finisher punch power interruption trouble When power interruption of the punch unit is detected |
| E7-60 | Description: Controller skating trouble Occurrence of an error in controller skating check |
| F1-20 | Description: Console finisher rear alignment motor trouble Rear alignment motor operation abnormality |
| H4 | Description: Fusing section low temperature trouble The set temperature is not reached within the specified time (3 min) after turning on the power relay, or the temperature does not reach 80°C within 80 sec. When the heater lamp is not turned off in the |
| F1-02 | Description: Mail-bin stacker transport motor abnormality Transport motor trouble |
| F1-40 | Description: Console finisher punch power interruption trouble When power interruption of the punch unit is detected |
