Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR317FP Top Searches

These results are ranked by popularity.

Error
F9-10Description: Printer PWB trouble Communication trouble between MCU and printer PWB
E1-15Description: IMC board Page Memory error/SRAM error IMC Page Memory Work SRAM abnormality
H4-01Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 90°C) is not reached within the specified time (about 17sec) from turning on the power ON SW. (When the temperature of sub heater thermistor falls below 140°C
H3-00Description: Main heater lamp abnormally high temperature hard detection trouble The fusing main heater thermistor causes abnormally high temperature.
E7-12Description: Shading trouble White correction is not completed in the specified number of times.

Sharp AR317FP Common Errors

The most common error codes.

Error
F9-10Description: Printer PWB trouble Communication trouble between MCU and printer PWB
E1-15Description: IMC board Page Memory error/SRAM error IMC Page Memory Work SRAM abnormality
H4-01Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 90°C) is not reached within the specified time (about 17sec) from turning on the power ON SW. (When the temperature of sub heater thermistor falls below 140°C
H3-00Description: Main heater lamp abnormally high temperature hard detection trouble The fusing main heater thermistor causes abnormally high temperature.
E7-12Description: Shading trouble White correction is not completed in the specified number of times.
F9-10Description: Printer PWB trouble Communication trouble between MCU and printer PWB
E1-15Description: IMC board Page Memory error/SRAM error IMC Page Memory Work SRAM abnormality
H4-01Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 90°C) is not reached within the specified time (about 17sec) from turning on the power ON SW. (When the temperature of sub heater thermistor falls below 140°C
H3-00Description: Main heater lamp abnormally high temperature hard detection trouble The fusing main heater thermistor causes abnormally high temperature.
E7-12Description: Shading trouble White correction is not completed in the specified number of times.