Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR267S Top Searches

These results are ranked by popularity.

Error
F6-99Description: FAX control PWB destination error The machine destination setup does not coincide with the FAX board destination setup.
H4-21Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 25°C: Sim 43-1-1) is not reached within the specified time (about 32sec) from turning on the power ON SW. (When the temperature falls below 140°C in the standb
E1-13Description: IMC board flash ROM error Flash ROM abnormality on IMC board
U2-04Description: EEPROM communication error MCU PWB EEPROM access circuit failure
E7-10Description: Shading trouble (black correction) CCD black reference plate scan level abnormality when the copy lamp turns off.

Sharp AR267S Common Errors

The most common error codes.

Error
F6-99Description: FAX control PWB destination error The machine destination setup does not coincide with the FAX board destination setup.
H4-21Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 25°C: Sim 43-1-1) is not reached within the specified time (about 32sec) from turning on the power ON SW. (When the temperature falls below 140°C in the standb
E1-13Description: IMC board flash ROM error Flash ROM abnormality on IMC board
U2-04Description: EEPROM communication error MCU PWB EEPROM access circuit failure
E7-10Description: Shading trouble (black correction) CCD black reference plate scan level abnormality when the copy lamp turns off.
F6-99Description: FAX control PWB destination error The machine destination setup does not coincide with the FAX board destination setup.
H4-21Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 25°C: Sim 43-1-1) is not reached within the specified time (about 32sec) from turning on the power ON SW. (When the temperature falls below 140°C in the standb
E1-13Description: IMC board flash ROM error Flash ROM abnormality on IMC board
U2-04Description: EEPROM communication error MCU PWB EEPROM access circuit failure
E7-10Description: Shading trouble (black correction) CCD black reference plate scan level abnormality when the copy lamp turns off.