Sharp AR267G Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR267G Top Searches

These results are ranked by popularity.

Error
F1-34Description: Punch motor trouble Punch motor operation abnormality
F6-88Description: FAX control PWB communication trouble (Timeout) Communication trouble between MCU and FAX control PWB (Timeout error)
H4-01Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 90°C) is not reached within the specified time (about 17sec) from turning on the power ON SW. (When the temperature of sub heater thermistor falls below 140°C
E1-11Description: IMC board ASIC error ASIC abnormality on IMC board
F9-96Description: PCL PWB incompatibility error Incompatible PCL PWB was installed to the copier

Sharp AR267G Common Errors

The most common error codes.

Error
F1-34Description: Punch motor trouble Punch motor operation abnormality
F6-88Description: FAX control PWB communication trouble (Timeout) Communication trouble between MCU and FAX control PWB (Timeout error)
H4-01Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 90°C) is not reached within the specified time (about 17sec) from turning on the power ON SW. (When the temperature of sub heater thermistor falls below 140°C
E1-11Description: IMC board ASIC error ASIC abnormality on IMC board
F9-96Description: PCL PWB incompatibility error Incompatible PCL PWB was installed to the copier
F1-34Description: Punch motor trouble Punch motor operation abnormality
F6-88Description: FAX control PWB communication trouble (Timeout) Communication trouble between MCU and FAX control PWB (Timeout error)
H4-01Description: Sub heater lamp abnormally low temperature detection The setup temperature (about 90°C) is not reached within the specified time (about 17sec) from turning on the power ON SW. (When the temperature of sub heater thermistor falls below 140°C
E1-11Description: IMC board ASIC error ASIC abnormality on IMC board
F9-96Description: PCL PWB incompatibility error Incompatible PCL PWB was installed to the copier