Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR200M Top Searches

These results are ranked by popularity.

Error
L3 00Description: The mirror home position (MHPS) does not turn on though the mirror base returning is completed during mirror initial operation after turning on the power. The mirror home position does not turn on when the mirror is returned to the home posi
E11 14Description: E-Sort PWB Work RAM abnormality
F6 82Description: Communication trouble between MCU and FAX control PWB (Overrun error)
U2 11Description: Counter check sum error. Counter check sum value stored in the EEPROM is abnormal.
L4 01Description: Main motor lock. The main motor encoder pulse is not detected for 400msec.

Sharp AR200M Common Errors

The most common error codes.

Error
L3 00Description: The mirror home position (MHPS) does not turn on though the mirror base returning is completed during mirror initial operation after turning on the power. The mirror home position does not turn on when the mirror is returned to the home posi
E11 14Description: E-Sort PWB Work RAM abnormality
F6 82Description: Communication trouble between MCU and FAX control PWB (Overrun error)
U2 11Description: Counter check sum error. Counter check sum value stored in the EEPROM is abnormal.
L4 01Description: Main motor lock. The main motor encoder pulse is not detected for 400msec.
L3 00Description: The mirror home position (MHPS) does not turn on though the mirror base returning is completed during mirror initial operation after turning on the power. The mirror home position does not turn on when the mirror is returned to the home posi
E11 14Description: E-Sort PWB Work RAM abnormality
F6 82Description: Communication trouble between MCU and FAX control PWB (Overrun error)
U2 11Description: Counter check sum error. Counter check sum value stored in the EEPROM is abnormal.
L4 01Description: Main motor lock. The main motor encoder pulse is not detected for 400msec.