These results are ranked by popularity.
| Error | |
|---|---|
| E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
| L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgm |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the sp |
| E7-10 | Description: Shading trouble (Black correction) The CCD black scan level is abnormal when the shading. |
The most common error codes.
| Error | |
|---|---|
| E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
| L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgm |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the sp |
| E7-10 | Description: Shading trouble (Black correction) The CCD black scan level is abnormal when the shading. |
| E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
| L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgm |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the sp |
| E7-10 | Description: Shading trouble (Black correction) The CCD black scan level is abnormal when the shading. |
