These results are ranked by popularity.
Error | |
---|---|
E1-82 | Description: IMC communication interface error (Overrun) An overrun error occurs in communication between the CPU and the IMC. |
H4-00 | Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C. |
E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgm |
E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
The most common error codes.
Error | |
---|---|
E1-82 | Description: IMC communication interface error (Overrun) An overrun error occurs in communication between the CPU and the IMC. |
H4-00 | Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C. |
E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgm |
E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
E1-82 | Description: IMC communication interface error (Overrun) An overrun error occurs in communication between the CPU and the IMC. |
H4-00 | Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C. |
E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgm |
E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |