Sharp AL2041 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AL2041 Top Searches

These results are ranked by popularity.

Error
H2-00Description: Thermistor open The thermistor is open. The fusing unit is not installed.
E7-01Description: Image data error
H3-00Description: Heat roller high temperature detection The fusing temperature exceeds 240°C.
E7-06Description: Image data decode error Image expansion error
H4-00Description: Heat roller low temperature detection 1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" me

Sharp AL2041 Common Errors

The most common error codes.

Error
H2-00Description: Thermistor open The thermistor is open. The fusing unit is not installed.
E7-01Description: Image data error
H3-00Description: Heat roller high temperature detection The fusing temperature exceeds 240°C.
E7-06Description: Image data decode error Image expansion error
H4-00Description: Heat roller low temperature detection 1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" me
H2-00Description: Thermistor open The thermistor is open. The fusing unit is not installed.
E7-01Description: Image data error
H3-00Description: Heat roller high temperature detection The fusing temperature exceeds 240°C.
E7-06Description: Image data decode error Image expansion error
H4-00Description: Heat roller low temperature detection 1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" me