Sharp AL2040CS Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AL2040CS Top Searches

These results are ranked by popularity.

Error
E1-81Description: IMC communication interface error (Parity) A parity error occurs in communication between the CPU and the IMC.
H4-00Description: Heat roller low temperature detection 1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" me
E1-82Description: IMC communication interface error (Overrun) An overrun error occurs in communication between the CPU and the IMC.
L1-00Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg
E1-84Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC.

Sharp AL2040CS Common Errors

The most common error codes.

Error
E1-81Description: IMC communication interface error (Parity) A parity error occurs in communication between the CPU and the IMC.
H4-00Description: Heat roller low temperature detection 1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" me
E1-82Description: IMC communication interface error (Overrun) An overrun error occurs in communication between the CPU and the IMC.
L1-00Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg
E1-84Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC.
E1-81Description: IMC communication interface error (Parity) A parity error occurs in communication between the CPU and the IMC.
H4-00Description: Heat roller low temperature detection 1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" me
E1-82Description: IMC communication interface error (Overrun) An overrun error occurs in communication between the CPU and the IMC.
L1-00Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg
E1-84Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC.