These results are ranked by popularity.
| Error | |
|---|---|
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L4-32 | Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l |
The most common error codes.
| Error | |
|---|---|
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L4-32 | Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L4-32 | Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l |
