These results are ranked by popularity.
| Error | |
|---|---|
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L4-32 | Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l |
| E7-10 | Description: Shading trouble (Black correction) The CCD black scan level is abnormal when the shading. |
The most common error codes.
| Error | |
|---|---|
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L4-32 | Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l |
| E7-10 | Description: Shading trouble (Black correction) The CCD black scan level is abnormal when the shading. |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L4-32 | Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l |
| E7-10 | Description: Shading trouble (Black correction) The CCD black scan level is abnormal when the shading. |
