These results are ranked by popularity.
| Error | |
|---|---|
| E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
The most common error codes.
| Error | |
|---|---|
| E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| E1-84 | Description: IMC communication interface error (Framing) A framing error occurs in communication between the CPU and the IMC. |
| L3-00 | Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| L4-01 | Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
