Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AL2020 Top Searches

These results are ranked by popularity.

Error
L3-00Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s
E7-01Description: Duplex model memory setup error, memory not-detected error
L4-01Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec.
E7-02Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
L4-32Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l

Sharp AL2020 Common Errors

The most common error codes.

Error
L3-00Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s
E7-01Description: Duplex model memory setup error, memory not-detected error
L4-01Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec.
E7-02Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
L4-32Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l
L3-00Description: Scanner return trouble When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the s
E7-01Description: Duplex model memory setup error, memory not-detected error
L4-01Description: Main motor lock detection When the main motor encoder pulse is not detected for 100 msec.
E7-02Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
L4-32Description: Exhaust fan motor lock detection trouble The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the l