Sharp AL1651CS Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AL1651CS Top Searches

These results are ranked by popularity.

Error
16Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
H3-00Description: Heat roller high temperature detection The fusing temperature exceeds 240°C.
16Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
H4-00Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
10Description: IMC trouble An abnormality occurs in the IMC.

Sharp AL1651CS Common Errors

The most common error codes.

Error
16Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
H3-00Description: Heat roller high temperature detection The fusing temperature exceeds 240°C.
16Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
H4-00Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
10Description: IMC trouble An abnormality occurs in the IMC.
16Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
H3-00Description: Heat roller high temperature detection The fusing temperature exceeds 240°C.
16Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory.
H4-00Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
10Description: IMC trouble An abnormality occurs in the IMC.