Samsung SF560R Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Samsung SF560R Top Searches

These results are ranked by popularity.

Error
32Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed.
11Description: Ghost (3) Ghost occurs at 66.3 or 75.5 mm intervals.
22Description: Defective FAX RECEIVE (2) Received data are lengthened or cut in the printing.
33Description: JAM 2 1. Recording paper is jammed in front of or inside the fuser. 2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the Actuator-Feed.
37Description: Fuser Error A message "Open Heat Error/Over heat/Heating Error' is displayed in the LCD panel.

Samsung SF560R Common Errors

The most common error codes.

Error
32Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed.
11Description: Ghost (3) Ghost occurs at 66.3 or 75.5 mm intervals.
22Description: Defective FAX RECEIVE (2) Received data are lengthened or cut in the printing.
33Description: JAM 2 1. Recording paper is jammed in front of or inside the fuser. 2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the Actuator-Feed.
37Description: Fuser Error A message "Open Heat Error/Over heat/Heating Error' is displayed in the LCD panel.
32Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed.
11Description: Ghost (3) Ghost occurs at 66.3 or 75.5 mm intervals.
22Description: Defective FAX RECEIVE (2) Received data are lengthened or cut in the printing.
33Description: JAM 2 1. Recording paper is jammed in front of or inside the fuser. 2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the Actuator-Feed.
37Description: Fuser Error A message "Open Heat Error/Over heat/Heating Error' is displayed in the LCD panel.