Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Samsung MultiXpress M5370LX Top Searches

These results are ranked by popularity.

Error
C3-1410, C3-1414, C3-1512Description: Imaging unit is not installed. Install the unit. Imaging Unit Failure: #C3-1414. Install imaging unit again. Imaging unit is not compatible. Check users guide.
H2-5001, H2-5002, H2-5096Description: Finisher Failure #H2-5001. Turn off then on, after checking finisher Finisher Failure #H2-5002. Turn off then on, after checking finisher Finisher Failure #H2-5096. Turn off then on, after checking finisher
M3-2130Description: Paper in output bin is full. Remove printed paper
S2-3421Description: Calibrating image density. Please wait...
11-2T01, 11-2T11, 11-2T21Description: Load tray with [Letter], [Plain] paper Load tray 1 with [Letter], [Plain] paper Load tray 2 with [Letter], [Plain] paper

Samsung MultiXpress M5370LX Common Errors

The most common error codes.

Error
C3-1410, C3-1414, C3-1512Description: Imaging unit is not installed. Install the unit. Imaging Unit Failure: #C3-1414. Install imaging unit again. Imaging unit is not compatible. Check users guide.
H2-5001, H2-5002, H2-5096Description: Finisher Failure #H2-5001. Turn off then on, after checking finisher Finisher Failure #H2-5002. Turn off then on, after checking finisher Finisher Failure #H2-5096. Turn off then on, after checking finisher
M3-2130Description: Paper in output bin is full. Remove printed paper
S2-3421Description: Calibrating image density. Please wait...
11-2T01, 11-2T11, 11-2T21Description: Load tray with [Letter], [Plain] paper Load tray 1 with [Letter], [Plain] paper Load tray 2 with [Letter], [Plain] paper
C3-1410, C3-1414, C3-1512Description: Imaging unit is not installed. Install the unit. Imaging Unit Failure: #C3-1414. Install imaging unit again. Imaging unit is not compatible. Check users guide.
H2-5001, H2-5002, H2-5096Description: Finisher Failure #H2-5001. Turn off then on, after checking finisher Finisher Failure #H2-5002. Turn off then on, after checking finisher Finisher Failure #H2-5096. Turn off then on, after checking finisher
M3-2130Description: Paper in output bin is full. Remove printed paper
S2-3421Description: Calibrating image density. Please wait...
11-2T01, 11-2T11, 11-2T21Description: Load tray with [Letter], [Plain] paper Load tray 1 with [Letter], [Plain] paper Load tray 2 with [Letter], [Plain] paper