Roland SP300 VersaCamm Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Roland SP300 VersaCamm Top Searches

These results are ranked by popularity.

Error
0110Description: Linear Encoder Error Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0111Description: Tool / Crop Error This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment.
0002Description: Sub CPU Communication Error Disorder of communication with Sub CPU
0120Description: Thermistor Error (Print Heater) Thermistor of the Print Heater doesn't work correctly.
0101Description: Limit Position Error Limit Initialization in the Service Mode has not been done.

Roland SP300 VersaCamm Common Errors

The most common error codes.

Error
0110Description: Linear Encoder Error Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0111Description: Tool / Crop Error This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment.
0002Description: Sub CPU Communication Error Disorder of communication with Sub CPU
0120Description: Thermistor Error (Print Heater) Thermistor of the Print Heater doesn't work correctly.
0101Description: Limit Position Error Limit Initialization in the Service Mode has not been done.
0110Description: Linear Encoder Error Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0111Description: Tool / Crop Error This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment.
0002Description: Sub CPU Communication Error Disorder of communication with Sub CPU
0120Description: Thermistor Error (Print Heater) Thermistor of the Print Heater doesn't work correctly.
0101Description: Limit Position Error Limit Initialization in the Service Mode has not been done.