Error |
---|
These results are ranked by popularity.
Error | |
---|---|
0109 | Description: Wiper Protection Error Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value. |
0002 | Description: Sub CPU Communication Error Disorder of communication with Sub CPU |
0110 | Description: Linear Encoder Error Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done. |
0003 | Description: DIPSW model setting error A setup about the model of DIPSW is set up in an unsuitable combination. |
0111 | Description: Tool / Crop Error This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment. |
The most common error codes.
Error | |
---|---|
0109 | Description: Wiper Protection Error Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value. |
0002 | Description: Sub CPU Communication Error Disorder of communication with Sub CPU |
0110 | Description: Linear Encoder Error Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done. |
0003 | Description: DIPSW model setting error A setup about the model of DIPSW is set up in an unsuitable combination. |
0111 | Description: Tool / Crop Error This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment. |
0109 | Description: Wiper Protection Error Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value. |
0002 | Description: Sub CPU Communication Error Disorder of communication with Sub CPU |
0110 | Description: Linear Encoder Error Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done. |
0003 | Description: DIPSW model setting error A setup about the model of DIPSW is set up in an unsuitable combination. |
0111 | Description: Tool / Crop Error This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment. |