Roland FP740 Hi-Fi Express Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Roland FP740 Hi-Fi Express Top Searches

These results are ranked by popularity.

Error
0109Description: Even though the machine takes a normal action, the output of the Wiper Sensor does not reach the desired value.
0110Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0113Description: Viscous ink stays in the Storage. (Only when BU-1 is installed.)
0002Description: Disorder of communication with Sub CPU. This occurs when the Sub CPU is not detected after turning on the machine.
0101Description: Limit Position Initialize has not been done.

Roland FP740 Hi-Fi Express Common Errors

The most common error codes.

Error
0109Description: Even though the machine takes a normal action, the output of the Wiper Sensor does not reach the desired value.
0110Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0113Description: Viscous ink stays in the Storage. (Only when BU-1 is installed.)
0002Description: Disorder of communication with Sub CPU. This occurs when the Sub CPU is not detected after turning on the machine.
0101Description: Limit Position Initialize has not been done.
0109Description: Even though the machine takes a normal action, the output of the Wiper Sensor does not reach the desired value.
0110Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0113Description: Viscous ink stays in the Storage. (Only when BU-1 is installed.)
0002Description: Disorder of communication with Sub CPU. This occurs when the Sub CPU is not detected after turning on the machine.
0101Description: Limit Position Initialize has not been done.