Roland AJ740 AdvancedJet Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Roland AJ740 AdvancedJet Top Searches

These results are ranked by popularity.

Error
0164Description: Even though the machine carries out the regular movement, the output of Pressure Pump 5 Sensor does not reach the expected value.
0107Description: Linear Encoder Setup has not been done.
0145Description: Heater is unusually hot. Dryer (2 lines/upper) temperature has reached 80°C and above.
0165Description: Even though the machine carries out the regular movement, the output of Pressure Pump 6 Sensor does not reach the expected value.
0110Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.

Roland AJ740 AdvancedJet Common Errors

The most common error codes.

Error
0164Description: Even though the machine carries out the regular movement, the output of Pressure Pump 5 Sensor does not reach the expected value.
0107Description: Linear Encoder Setup has not been done.
0145Description: Heater is unusually hot. Dryer (2 lines/upper) temperature has reached 80°C and above.
0165Description: Even though the machine carries out the regular movement, the output of Pressure Pump 6 Sensor does not reach the expected value.
0110Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
0164Description: Even though the machine carries out the regular movement, the output of Pressure Pump 5 Sensor does not reach the expected value.
0107Description: Linear Encoder Setup has not been done.
0145Description: Heater is unusually hot. Dryer (2 lines/upper) temperature has reached 80°C and above.
0165Description: Even though the machine carries out the regular movement, the output of Pressure Pump 6 Sensor does not reach the expected value.
0110Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.