Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Riso SF5450 Top Searches

These results are ranked by popularity.

Error
T13 221Description: • Cutter does not operate normally. • Master was not cut properly.
T20 416Description: • Paper ejection wing does not operate properly. • Paper ejection motor is overloaded.
C04 402Description: • Paper is not set in the paper feed tray (except when auto tray is selected).
F62 956Description: • An error has occurred on RLP.
T99 181Description: • Software error

Riso SF5450 Common Errors

The most common error codes.

Error
T13 221Description: • Cutter does not operate normally. • Master was not cut properly.
T20 416Description: • Paper ejection wing does not operate properly. • Paper ejection motor is overloaded.
C04 402Description: • Paper is not set in the paper feed tray (except when auto tray is selected).
F62 956Description: • An error has occurred on RLP.
T99 181Description: • Software error
T13 221Description: • Cutter does not operate normally. • Master was not cut properly.
T20 416Description: • Paper ejection wing does not operate properly. • Paper ejection motor is overloaded.
D22 540Description: • Print drum EEPROM reading/writing has failed. • Print drum EEPROM data is not correct.
T02 407Description: • The Paper feed tray is not in proper position. • Paper feed tray elevator motor is overloaded.
T98 736Description: • Hardware error